|
The COMPUTORQ3
Electronic Torque Wrench is a simple to use digital readout
wrench that displays real time torque values in any of four
torque units, ft.lbs., in.lbs., Nm, kg.cm. Simply set the
desired torque value and apply force until the green LED
illuminates. Great for light industrial, automotive, motorcycle,
watercraft and aircraft applications. |
| Easy as
1, 2, 3 |
1. READY -
Set limits.
2. GET SET -
Set the torque and units
3. GO - Use
it! |
|
|
•
Sleek New Design
• 15-Degree Flex Ratcheting Head
• Push Button Socket Release Head
• Large, Easy to Read Digital Display
• Long Battery Life, Uses 2 Each CR123 Lithium Batteries
• Ergonomically Designed Molded Nom-Slip Rubber Grip
• Torques in Both Clockwise and Counterclockwise Directions
• Battery Saving Auto-Shutoff After Two Minutes
• COMPUTORQ3 Remembers Last Unit and Torque Setting Selected
• Audible Tone Sounds when Set Torque Value is Reached, if the
Set
Torque Value is Exceeded, an Alarm Tone will Sound.
•
3 Color LED Light Bar
YELLOW
LED Indicates Approaching
Desired Torque Setting
GREEN LED Indicates
Desired Torque Value is Reached
RED LED Indicates
Fastener was Overtorqued, Loosen and Retighten.
|
•
When Desired Torque Value is Reached, Display will Hold Value
and Flash for
Ten Seconds.
• COMPUTORQ3 will Operate in any of Four Torque Units, Foot
Pounds (Ft.
Lbs.), Inch Pounds (In. Lbs.), Newton Meter (NM) or Kilogram
Centimeter (Kg.
CM.).
• ACCURACY: ± 2% CW of Readings from 20% to 100% of Full
Scale
± 3%
CCW of Readings from 20% to 100% of Full Scale
• N.I.S.T. Traceable Certificate of Calibration Included |
